September 1 through December 31, 2026

m·D=s² Fall Promotion – Mafell and DUSS

Four machine sets, plus an L-BOXX package with drilling tools. Each machine comes with a coupon for a m·D=s² hoodie.

Die Aktionspreise gibt Mafell vor. Bei uns kommt dazu, was zur Maschine passt: die RUWI Tischverlängerung für die Erika, von uns entwickelt, und die Beratung aus der eigenen Werkstatt.

Mafell ERIKA 85 Unterflur-Zugsäge im Aktionsset

ERIKA 85 Under-Table Pull Saw, m·D=s² Set

Mafell item no. 971991

Cutting length 430 mm, tilt range –3° to 48°, retractable riving knife. The Quickstand sets up the saw on four aluminum legs without tools—you can set it up and take it down on your own. The E-control electronic control system and the appropriate saw blade cut not only wood but also plastic and aluminum profiles.

Included in the set:1 carbide-tipped saw blade 250 × 2.8 × 30 mm, Z 40, WZ, 1 wheel attachment kit, 1 push stick, 1 6 mm hex wrench, 1 dust extraction kit with 2 nozzles, 1 clamping piece, 1 quick stand, 1 4-meter connection hose, 1 MFA multifunction stop with switchable angle locking, 1 m·D=s² Hoodie gift certificate

excluding VAT2,519.00 € including VAT€2,997.61

View the set in the store Questions about this set? Workshop Discussion

Mafell LS 103/40 Ec Kettenstemmer im Aktionsset

Chain Mortiser LS 103/40 Ec, Chain Set 28 × 40 × 100 mm, m·D=s² Set

Mafell item no. 924291

8.7 kg, mortise holes up to 100 mm deep. The long crosscut fence holder is suitable for large cross-sections; you can change and tension the chain while the chain guard is installed. With the FG 150 guide frame, it can cut up to 140 mm; with the SG 230, SG 400, or SG 500 slot frames, it can cut up to 500 mm.

Included in the set:1 cross stop, 1 4-mm hex key, 1 8-mm hex key, 1 10-meter connection cable, 1 m·D=s² Hoodie gift certificate

excluding VAT1,926.00 € including VAT€2,291.94

View the set in the store Questions about this set? Workshop Discussion

DUSS PX 78 Kombihammer im Aktionsset mit Meißeln

PX78SET SDS-max Combination Hammer, m·D=s² Set

DUSS item no. 690234

Drill and chisel hammer with SDS-max chuck for concrete and masonry, sold as a set with an SMX4 pointed chisel and an FMX4 flat chisel in a tool case. A tube of grease for the tool chuck is included.

Included in the set:1 side handle, 1 additional handle, 1 tube of grease, 1 SMX4 pointed chisel, 1 FMX4 flat chisel, 1 tool case, 1 m·D=s² hoodie voucher

excluding VAT€1,349.00 including VAT€1,605.31

View the set in the store Questions about this set? Workshop Discussion

DUSS DIA 303 S Diamantbohrmaschine im Aktionsset

DIA303S Diamond Drill, m·D=s² Set

DUSS item no. 690235

Core drilling in wood and concrete with a single machine—using a wood hole saw in beams and a diamond drill bit in walls. Comes as a set with a ZST centering rod for pilot drilling and an SK61 suction head for connecting to a dust extraction system.

Included in the set:1 side handle, 1 additional handle, 1 ZST centering rod, 1 SK61 suction head, 1 open-end wrench (SW 22), 1 open-end wrench (SW 30), 1 dry lubricant spray, 1 tool case, 1 m·D=s² hoodie gift certificate

excluding VAT€1,499.00 including VAT€1,783.81

Questions about this set? Workshop Discussion

Mafell L-BOXX Contractor Trolley with Tool Tray, Wood Hole Saw, and Diamond Drill Bit

L-BOXX Contractor with wood hole saw and diamond drill bit

Mafell and DUSS Package No. 1P0504

The L-BOXX Contractor trolley holds the machine, tools, and accessories, while the tool tray organizes small parts on top. Also included are the two Ø 82 mm tools for the DIA303S: the LB82 wood hole saw for beams and the CSL82 diamond core bit for concrete, both with a 300 mm working length and a G 1/2-inch thread.

1 ×	L-BOXX Contractor C476-TB Transport Case with Wheelsitem no. 095280	199,00 €
1 ×	Insert Tool Tray C115-TTitem no. 095305	20,00 €
1 ×	LB82 G 1/2-inch wood hole saw, Ø 82 mm, AL 300 mmitem no. 697311	315,00 €
1 ×	CSL82 G 1/2-inch Diamond Core Bit, XIP Ø 82 mm, AL 300 mmitem no. 698183	181,00 €
	Total of individual prices, excluding VAT.	715,00 €
	Your Price Advantage	265,00 €

excluding VAT450.00 € including VAT€535.50~~€850.85~~ Total of individual prices, including VAT

View the package in the store Questions about this set? Workshop discussion

A hoodie for every machine

Each of the four machine sets includes a coupon for a black m·D=s² hoodie. You can redeem it yourself: Enter the coupon code in the Mafell Fan Shop shopping cart and select the hoodie in your size. The code is valid only for this promotional item and can be redeemed through December 31, 2027.

The L-BOXX package is an add-on offer that does not include a hoodie voucher.

Visit the Mafell Fan Shop

100 Years of the Chain Mortiser – What the Numbers on the Chain Mean

In 1926, Mafell introduced its first chain-driven mortiser. In 2026, the LS 103 Ec can mortise holes up to 100 mm deep; with the FG 150 guide frame, up to 140 mm; and with the SG 230, SG 400, or SG 500 slot frames, up to 500 mm.

The chain kit has three dimensions, which are 28 × 40 × 100 mm: 28 mm chain width, 40 mm hole width, and 100 mm mortising depth. For other tenon sizes, simply swap out the kit—the tensioning system allows you to change and retension the chain while the chain guard is installed.

Which set is right for your workshop?

Erika 70 or Erika 85, which chain set for your tenons, table extension short or long—we’ll answer questions like these during a workshop consultation, over the phone, or via WhatsApp. Mafell is located in Oberndorf am Neckar, and we’re in Fluorn-Winzeln, just a few kilometers away. We developed the table extension for the Erika right here.

About the Workshop Discussion

Phone +49 7402 8414

Promotional prices in euros, valid from September 1 through December 31, 2026. Subject to errors and changes.