RUWI Clamping Technology · Clamping Workshop
Place your workpiece on the table. We'll show you how to secure it.
Choose a clamping configuration: The clamps fit into the correct holes, and you can see each handle, along with the parts and price. No photo—this is a rendering based on our CAD files. Pull to rotate.
What Festool and Sauter Offer for This
For the same situation. They all fit a 20 mm diameter. You can check with your dealer to see how much the others cost; our prices are listed above.
The same parts are available from KIPP
HEINRICH KIPP WERK and RUWI are collaborating: We supply clamping technology to KIPP, KIPP sells it under its own part number, and KIPP supplies us. If your company orders from KIPP anyway, you’ll find seven of our parts there, with matching dimensions. We’ve verified the correspondence using KIPP’s dimensional drawings and our own CAD files, as of September 13, 2026.
Do you want to see that on your workpiece?
Reiner walks you through it over the phone, with the camera on the table. Twenty minutes—your workpiece, your questions. No sales pitch—just a workshop conversation.
This page shows the 20-mmhole grid. For aluminum profiles with T-slot, welding table with Ø 16 or Ø 28, and the RUWI drilling table , the Clamp Finder guides you to the part number in three questions—there are 52 parts listed there, and 24 here.
Every part in the scene comes from a CAD file: horizontal toggle clamp, vertical toggle clamp, eccentric clamp (with plate), and pivot bearing, positioning angle, support rail, clamping bolt , as well as the tables themselves. We did not recreate any of the parts. The workpiece, on the other hand, is not an actual part: the board, frame, and door are shown as placeholders with realistic dimensions, and the caption below the image specifies which of them were measured. For the horizontal toggle clamp , the lever travel is estimated; in the illustrated position, the cap is 113 mm in front of the hole and can be adjusted by 25 mm. The 3 kN applies to the clamp, not to the connection to the plate. The hole patterns on the models were counted, not calculated. The eccentric lifts 3.55 mm as measured on the model; KIPP specifies 4 mm for the identically constructed part. Prices: taken live from the product data in the shop, recalculated to net prices—the shop calculates prices with VAT included. Outside the shop, the net prices as of September 9, 2026, are listed. Prototype r43.